Details

---

BUY M5M34051FP https://www.utsource.net/itm/p/12612228.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	Vcc	2.7	-	3.6	V
Standby Current	Icc	-	1.0	2.0	渭A	@ Vcc = 3.0V, Ta = 25掳C
Active Current	Icc	-	2.0	3.0	mA	@ Vcc = 3.0V, Ta = 25掳C, fCLK = 1MHz
Operating Temperature	Ta	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C
Data Retention Time	tDR	10	-	-	Years	@ Vcc = 3.0V, Ta = 25掳C
Write Cycle Time	tWC	5	-	10	ms
Page Program Time	tPP	2.5	-	5	ms
Sector Erase Time	tSE	30	-	60	ms
Chip Erase Time	tCE	200	-	400	ms
Data Output Delay	tDO	0	10	25	ns	@ Vcc = 3.0V, Ta = 25掳C, fCLK = 1MHz
Address Access Time	tAA	0	10	25	ns	@ Vcc = 3.0V, Ta = 25掳C, fCLK = 1MHz
Read Cycle Time	tRC	0	10	25	ns	@ Vcc = 3.0V, Ta = 25掳C, fCLK = 1MHz

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 3.6V.
   • The device should be powered with a stable voltage to avoid data corruption.

2. Temperature:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device within the temperature range of -65掳C to 150掳C.

3. Current Consumption:

   • Monitor the standby current (Icc) which should not exceed 2.0 渭A at 3.0V and 25掳C.
   • The active current should be between 2.0 mA and 3.0 mA under typical operating conditions.

4. Data Retention:

   • The device retains data for at least 10 years when powered at 3.0V and operated at 25掳C.

5. Write and Erase Operations:

   • The write cycle time (tWC) is between 5 ms and 10 ms.
   • The page program time (tPP) is between 2.5 ms and 5 ms.
   • The sector erase time (tSE) is between 30 ms and 60 ms.
   • The chip erase time (tCE) is between 200 ms and 400 ms.

6. Timing Parameters:

   • Ensure that the data output delay (tDO) is between 0 ns and 25 ns.
   • The address access time (tAA) should be between 0 ns and 25 ns.
   • The read cycle time (tRC) should be between 0 ns and 25 ns.

7. Clock Frequency:

   • The device is designed to operate with a clock frequency (fCLK) of up to 1 MHz.

8. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Follow proper soldering techniques to ensure reliable connections.

9. Programming:

   • Refer to the specific programming algorithms provided by the manufacturer for writing and erasing operations to ensure data integrity.

10. Storage:

    • Store the device in a dry, cool place to prevent moisture damage and prolong its lifespan.

(For reference only)