Details

---

BUY FGH60T65SHD https://www.utsource.net/itm/p/12612233.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	-	1.8	2.3	V	@ IF = 20 A, TA = 25掳C
Reverse Blocking Voltage	VRRM	650	-	-	V	@ IR = 250 渭A, TA = 25掳C
Continuous Forward Current	IF(AV)	-	-	60	A	@ TC = 75掳C
Peak Forward Surge Current	IF(SM)	-	360	-	A	@ t = 10 ms, TA = 25掳C
Junction Temperature	TJ	-	-	150	掳C
Storage Temperature	TSTG	-40	-	150	掳C
Thermal Resistance, Junction to Case	R胃JC	-	0.5	-	掳C/W

Instructions for Using FGH60T65SHD

1. Mounting and Handling:

   • Handle the device with care to avoid mechanical stress.
   • Ensure that the mounting surface is clean and flat to ensure good thermal contact.
   • Use appropriate heat sink and thermal compound to improve heat dissipation.

2. Electrical Connections:

   • Connect the device according to the circuit diagram provided.
   • Ensure that all connections are secure and free from short circuits.
   • Use wires with appropriate gauge to handle the current ratings.

3. Operating Conditions:

   • Do not exceed the maximum ratings specified in the parameter table.
   • Monitor the junction temperature to prevent overheating.
   • Ensure adequate cooling to maintain the device within its operating temperature range.

4. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Avoid exposure to corrosive environments or high humidity.

5. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Use a suitable power supply and test equipment to measure the parameters accurately.

6. Safety Precautions:

   • Always use appropriate safety gear when handling high-voltage circuits.
   • Follow all relevant safety standards and guidelines during installation and operation.

(For reference only)