Details

---

BUY JS1A-24V-F https://www.utsource.net/itm/p/12612242.html

Parameter	Description	Value
Part Number	Full Part Number	JS1A-24V-F
Type	Relay Type	SPDT (Single Pole Double Throw)
Coil Voltage	Nominal Coil Voltage	24V DC
Coil Power	Coil Power Consumption	150mW
Coil Resistance	Coil Resistance	384惟
Contact Form	Contact Configuration	1C/O + 1C/C
Contact Rating	Maximum Switching Capacity	10A @ 250VAC
Insulation Voltage	Dielectric Strength Between Contacts and Coil	1500VAC for 1 minute
Operating Temperature	Operating Temperature Range	-40掳C to +85掳C
Storage Temperature	Storage Temperature Range	-40掳C to +125掳C
Dimensions	Dimensions (L x W x H)	17.5mm x 12.2mm x 9.8mm
Weight	Weight	2.6g
Terminal Type	Terminal Type	Solder Lug
Certifications	Compliance Standards	UL, VDE, CQC

Instructions for Use

1. Installation:

   • Ensure that the relay is installed in a location where it will not be exposed to excessive heat, moisture, or mechanical stress.
   • Mount the relay on a flat, stable surface using the provided mounting holes or adhesive.

2. Electrical Connections:

   • Connect the coil terminals to the control circuit using the specified coil voltage (24V DC).
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit according to your application requirements.

3. Operation:

   • When the control circuit applies the nominal coil voltage, the relay will energize, causing the contacts to switch from the NC position to the NO position.
   • When the control circuit removes the voltage, the relay will de-energize, and the contacts will return to their default NC position.

4. Maintenance:

   • Regularly inspect the relay for signs of wear, damage, or contamination.
   • If the relay is used in a high-dust environment, clean the contacts periodically to ensure reliable operation.

5. Safety Precautions:

   • Do not exceed the maximum switching capacity of the contacts.
   • Ensure proper insulation and grounding to prevent electrical shock.
   • Do not operate the relay outside its specified temperature range.

6. Disposal:

   • Dispose of the relay in accordance with local environmental regulations.

(For reference only)