Details

---

BUY STA413A https://www.utsource.net/itm/p/12612247.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Supply Voltage	Vcc	4.5	5.0	5.5	V	Operating supply voltage
Quiescent Current	Iq	-	2.5	-	mA	Quiescent current at no load
Output Power	Pout	-	3.2	-	W	Maximum output power into 8惟 load
Efficiency	畏	-	75	-	%	Efficiency at maximum output power
Signal-to-Noise Ratio	SNR	-	95	-	dB	Signal-to-noise ratio at 1kHz, A-weighted
Total Harmonic Distortion	THD	-	0.1	-	%	Total harmonic distortion at 1kHz, 1W output
Input Sensitivity	Vin	100	200	300	mV	Input sensitivity for full output power
Input Impedance	Zin	-	10	-	k惟	Input impedance
Operating Temperature	Toper	-40	25	85	掳C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	掳C	Storage temperature range

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 5.5V.
   • Connect the positive terminal of the power supply to the Vcc pin and the negative terminal to the GND pin.

2. Input Connection:

   • Connect the audio signal to the input pin (Vin).
   • The input impedance is 10k惟, so ensure the source impedance is compatible to avoid loading issues.

3. Output Connection:

   • Connect the speaker to the output pins (Out+ and Out-).
   • For optimal performance, use an 8惟 speaker.

4. Heat Dissipation:

   • The device can dissipate heat, especially at higher output powers. Ensure adequate heat sinking or cooling to maintain operating temperatures within the specified range (-40掳C to 85掳C).

5. Signal-to-Noise Ratio:

   • To achieve the best signal-to-noise ratio (SNR), keep the input signal level within the recommended range (100mV to 300mV).

6. Total Harmonic Distortion:

   • To minimize total harmonic distortion (THD), operate the device within its linear region and avoid overdriving the input.

7. Storage:

   • Store the device in a dry environment within the storage temperature range (-65掳C to 150掳C).

8. Testing:

   • Before final installation, test the device with a known good signal and load to ensure proper operation.

By following these instructions, you can ensure reliable and efficient operation of the STA413A amplifier.

(For reference only)