Details

---

BUY LTC1799IS5#TRMPBF https://www.utsource.net/itm/p/12612253.html

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage Range	VIN	2.7	-	5.5	V
Output Frequency	fOUT	-	300	600	kHz
Supply Current (Active)	ISUPPLY	-	2.8	-	渭A
Supply Current (Shutdown)	ISD	-	0.1	-	渭A
Output Duty Cycle	D	0.3	-	0.7	-
Output Voltage Range	VOUT	-	0.6	4.5	V
Rise Time (Output)	tr	-	20	-	ns
Fall Time (Output)	tf	-	20	-	ns
Propagation Delay	tPD	-	20	-	ns
Operating Temperature Range	Toper	-40	-	125	掳C
Storage Temperature Range	Tstg	-65	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the input voltage (VIN) is within the specified range of 2.7V to 5.5V.
   • Connect a bypass capacitor (typically 0.1渭F) close to the power supply pins to filter noise.

2. Frequency Setting:

   • The output frequency (fOUT) can be set using external resistors or capacitors. Refer to the datasheet for specific resistor and capacitor values to achieve the desired frequency.

3. Output Configuration:

   • The output duty cycle can be adjusted by configuring the appropriate pins. The typical duty cycle range is from 30% to 70%.

4. Output Voltage:

   • The output voltage (VOUT) can be set within the range of 0.6V to 4.5V using external components. Consult the datasheet for detailed configuration.

5. Operation Modes:

   • Active Mode: The device operates normally with the supply current typically around 2.8渭A.
   • Shutdown Mode: To reduce power consumption, use the shutdown pin to place the device in a low-power state with a supply current of approximately 0.1渭A.

6. Temperature Considerations:

   • Ensure the operating temperature (Toper) remains within -40掳C to 125掳C.
   • Store the device within the storage temperature range of -65掳C to 150掳C.

7. Layout and PCB Design:

   • Use a ground plane to minimize noise and improve stability.
   • Keep signal traces short and direct to reduce parasitic inductance and capacitance.

8. Testing and Validation:

   • Verify the output frequency and voltage using an oscilloscope.
   • Test the device under various operating conditions to ensure reliability and performance.

For more detailed information, refer to the official LTC1799IS5#TRMPBF datasheet.

(For reference only)