Details

---

BUY AD5696RBRUZ https://www.utsource.net/itm/p/12612256.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VDD	2.7	-	5.5	V
Output Voltage Range	VOUT	0	-	VDD-1.2	V
Digital-to-Analog Output	DNL	-0.5	0	+0.5	LSB
INL	INL	-1	0	+1	LSB
Settling Time	tSETTLE	-	5	-	μs
Power Consumption	IDD	-	350	-	μA
Reference Input Range	VREF	0	-	VDD	V
Operating Temperature	Toper	-40	-	+125	°C

Instructions for Using AD5696RBRUZ

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • Connect the power supply to the VDD pin and ground (GND) to the GND pin.

2. Reference Voltage:

   • The reference voltage (VREF) can be set externally or internally.
   • For external reference, connect the desired voltage to the VREF pin.
   • For internal reference, connect the VREF pin to VDD.

3. Digital Input:

   • The AD5696RBRUZ supports SPI communication.
   • Connect the SPI lines (SCLK, SDIN, LDAC, CS) to your microcontroller or controller.
   • Use the appropriate SPI commands to write to the DAC register.

4. Output Configuration:

   • The output voltage (VOUT) will be proportional to the digital code written to the DAC register.
   • The output range is from 0V to VDD - 1.2V.

5. Settling Time:

   • After writing a new value to the DAC register, allow at least 5 microseconds for the output to settle.

6. Power Consumption:

   • The device typically consumes 350 μA of current.

7. Operating Temperature:

   • Ensure the operating temperature is within the range of -40°C to +125°C.

8. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool environment to prevent moisture damage.

9. Testing:

   • After installation, test the device by applying known digital codes and measuring the corresponding output voltages to ensure proper operation.

(For reference only)