Details

---

BUY MAX3281EAUT+T https://www.utsource.net/itm/p/12612274.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	Operating	2.7	-	5.5	V
Output Current	IOUT	Per Channel	-	100	-	mA
Operating Temperature	TOP	-	-40	-	85	°C
Storage Temperature	TSTG	-	-65	-	150	°C
Power Consumption	PCON	Quiescent	-	1.2	-	mW
Input Voltage Range	VIN	-	0	-	5.5	V
Propagation Delay	tpd	-	-	10	-	ns
Data Rate	fDATA	-	-	-	100	Mbps

Instructions for MAX3281EAUT+T

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.7V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Pin Configuration:

   • Refer to the pinout diagram provided in the datasheet to ensure correct connections.
   • Connect all necessary pins as specified, including power, ground, and signal lines.

3. Output Current:

   • The device can provide up to 100mA per channel. Ensure that the load does not exceed this limit to prevent damage.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Store the device in an environment where temperatures do not exceed -65°C to 150°C.

5. Input Voltage:

   • The input voltage (V_IN) should be within the range of 0V to 5.5V to ensure proper operation.

6. Propagation Delay:

   • The typical propagation delay is 10ns. This value should be considered when designing timing-sensitive circuits.

7. Data Rate:

   • The device supports data rates up to 100Mbps. Ensure that the system design accommodates this maximum data rate.

8. Mounting and Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow recommended soldering and mounting procedures to ensure reliable connections.

9. Testing and Validation:

   • After assembly, perform initial testing under controlled conditions to verify functionality.
   • Monitor power consumption and temperature during operation to ensure they remain within safe limits.

10. Compliance and Standards:

    • Ensure that the device meets all relevant compliance standards and regulations for your application.

For detailed information and specific applications, refer to the full datasheet provided by Maxim Integrated.

(For reference only)