Details

---

BUY TLK105LRHBR https://www.utsource.net/itm/p/12612287.html

Below is the parameter table and instructions for the TLK105LRHBR, a 10/100BASE-TX to 1000BASE-X Media Access Control (MAC) and Physical Coding Sublayer (PCS) Transceiver from Texas Instruments.

TLK105LRHBR Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Condition
Supply Voltage	VCC	3.0	3.3	3.6	V	Operating
Operating Temperature Range		-40		85	掳C	Industrial
Data Rate (1000BASE-X)		1.25		1.25	Gbps
Data Rate (10/100BASE-TX)		10/100		10/100	Mbps
Output Drive Strength		1.2	1.6	2.0	mA	100惟 Differential
Input Sensitivity		-15	-10	-5	dBm	1000BASE-X
Power Consumption		1.2	1.5	1.8	W	Full Operation
Slew Rate	SR	1.0	1.5	2.0	V/ns	Output Drivers
Rise/Fall Time	tR/tF	1.0	1.5	2.0	ns	Output Drivers
Propagation Delay	tPD	1.0	1.5	2.0	ns	1000BASE-X
Jitter		0.5	0.7	1.0	UI	1000BASE-X
Common-Mode Voltage Range	VCM	0.8	1.2	1.6	V	Differential Inputs
Differential Input Impedance	ZDIFF	90	100	110	惟	Differential Inputs
Differential Output Impedance	ZDIFF	90	100	110	惟	Differential Outputs

Instructions for TLK105LRHBR

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 3.0V to 3.6V.
   • Use a stable power source to avoid voltage fluctuations that can affect performance.

2. Temperature Range:

   • The device is designed to operate in an industrial temperature range of -40掳C to 85掳C.
   • Ensure adequate cooling or heating mechanisms are in place if operating near the limits.

3. Data Rate Configuration:

   • The TLK105LRHBR supports both 10/100BASE-TX and 1000BASE-X data rates.
   • Configure the data rate according to your network requirements using the appropriate control signals.

4. Output Drive Strength:

   • Adjust the output drive strength to match the differential impedance of the transmission line (typically 100惟).
   • Use the provided settings to optimize signal integrity and reduce reflections.

5. Input Sensitivity:

   • Ensure the input signal level is within the sensitivity range of -15dBm to -5dBm for 1000BASE-X.
   • Use appropriate amplification or attenuation to meet these levels.

6. Power Consumption:

   • Monitor power consumption to ensure it does not exceed 1.8W during full operation.
   • Consider power management techniques to reduce energy usage when possible.

7. Slew Rate and Rise/Fall Time:

   • Set the slew rate and rise/fall time of the output drivers to match the system requirements.
   • Use the provided typical values as a starting point and adjust as needed.

8. Propagation Delay and Jitter:

   • Minimize propagation delay and jitter to maintain signal integrity.
   • Use high-quality PCB materials and design practices to reduce these parameters.

9. Common-Mode Voltage and Impedance:

   • Ensure the common-mode voltage and differential impedance of the inputs and outputs are within the specified ranges.
   • Use termination resistors to match the impedance of the transmission lines.

10. Handling and Storage:

    • Handle the device with care to avoid static damage.
    • Store in a dry, cool environment to prevent moisture and temperature-related issues.

By following these instructions, you can ensure optimal performance and reliability of the TLK105LRHBR in your application.

(For reference only)