Details

---

BUY PDM41024LA15SOI https://www.utsource.net/itm/p/12612332.html

Parameter	Symbol	Value	Unit
Supply Voltage	VDD	2.7 to 5.5	V
Output Current (Max)	IOUT	2.0	A
Dropout Voltage	VDROPOUT	0.3 (at 2A)	V
Quiescent Current	IQ	2.5	mA
Shutdown Current	ISD	0.1	渭A
Thermal Shutdown	TSD	160	掳C
Operating Temperature	TOPR	-40 to 125	掳C
Storage Temperature	TSTG	-65 to 150	掳C
Junction Temperature	TJ	-40 to 150	掳C
Package Type	PKG	SOT-89	-

Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage is within the range of 2.7V to 5.5V to avoid damage to the device.

2. Output Current:

   • The maximum output current is 2.0A. Do not exceed this limit to prevent overheating and potential failure.

3. Dropout Voltage:

   • The dropout voltage is 0.3V at a 2A load. Ensure the input voltage is at least 0.3V higher than the desired output voltage to maintain regulation.

4. Quiescent Current:

   • The quiescent current is 2.5mA. This is the current consumed by the regulator when it is active but not supplying any load.

5. Shutdown Current:

   • The shutdown current is 0.1渭A. Use the shutdown pin to reduce power consumption when the regulator is not needed.

6. Thermal Shutdown:

   • The device will automatically shut down if the junction temperature exceeds 160掳C to prevent thermal damage.

7. Operating Temperature:

   • The operating temperature range is from -40掳C to 125掳C. Ensure the device is used within this range to maintain performance and reliability.

8. Storage Temperature:

   • The storage temperature range is from -65掳C to 150掳C. Store the device in a dry, cool place to prevent degradation.

9. Junction Temperature:

   • The maximum junction temperature is 150掳C. Ensure proper heat dissipation to keep the junction temperature within safe limits.

10. Package Type:

    • The device is packaged in a SOT-89 package. Follow standard handling and soldering guidelines for this package type to ensure reliable assembly.

11. Layout Considerations:

    • Place the input and output capacitors as close as possible to the device to minimize noise and improve stability.
    • Use a ground plane to help dissipate heat and reduce electromagnetic interference (EMI).

12. Capacitor Selection:

    • Input Capacitor: Use a ceramic capacitor with a value of 10渭F or more to filter input noise.
    • Output Capacitor: Use a ceramic capacitor with a value of 10渭F or more to stabilize the output voltage.

13. Thermal Management:

    • If the device is expected to operate near its maximum output current, consider using a heatsink or thermal pad to improve heat dissipation.

14. Safety Precautions:

    • Avoid short circuits on the output to prevent damage to the device.
    • Use appropriate fuses or circuit breakers to protect against overcurrent conditions.

By following these instructions, you can ensure optimal performance and longevity of the PDM41024LA15SOI linear regulator.

(For reference only)