Details

---

BUY FDC9229BT https://www.utsource.net/itm/p/12612347.html

Below is the parameter table and instructions for the FDC9229BT:

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Condition
Supply Voltage	VDD	4.5	-	5.5	V
Output Current	IOUT	-	2.0	3.0	A	Continuous
Peak Current	IPEAK	-	4.0	6.0	A	Pulse
Efficiency	畏	80	85	90	%	VIN = 12V, VOUT = 5V, IOUT = 2A
Switching Frequency	fSW	200	400	600	kHz
Quiescent Current	IQ	10	20	30	渭A	No Load
Shutdown Current	ISD	0.1	0.5	1.0	渭A	VDD = 5V
Operating Temperature Range	Toperating	-40	-	125	掳C
Storage Temperature Range	Tstorage	-65	-	150	掳C

Instructions

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V.
   • Use appropriate input filtering capacitors to stabilize the input voltage.

2. Output Current (IOUT):

   • The device can provide a continuous output current of up to 3A.
   • For pulse applications, the peak current can go up to 6A.

3. Efficiency (畏):

   • The efficiency is optimized at typical operating conditions (VIN = 12V, VOUT = 5V, IOUT = 2A).
   • Ensure proper heat dissipation to maintain high efficiency.

4. Switching Frequency (fSW):

   • The switching frequency can be adjusted between 200kHz and 600kHz.
   • Use external components like resistors or capacitors to set the desired frequency.

5. Quiescent Current (IQ):

   • The quiescent current is typically 20渭A with no load.
   • Minimize this current by optimizing the circuit design.

6. Shutdown Current (ISD):

   • When the device is in shutdown mode, the current consumption is very low (0.5渭A typical).

7. Operating Temperature Range (Toperating):

   • The device operates reliably within the temperature range of -40掳C to 125掳C.
   • Ensure adequate cooling for high-temperature environments.

8. Storage Temperature Range (Tstorage):

   • Store the device in temperatures ranging from -65掳C to 150掳C.

9. PCB Layout:

   • Use a good PCB layout to minimize parasitic inductance and resistance.
   • Place decoupling capacitors close to the power pins.

10. Thermal Management:

    • Use a heatsink or thermal pad to dissipate heat effectively.
    • Ensure proper airflow around the device if it is used in a high-power application.

11. Protection Features:

    • The device includes overcurrent protection, thermal shutdown, and undervoltage lockout.
    • Refer to the datasheet for specific details on these features.

12. Application Notes:

    • Consult the application notes for detailed information on designing circuits with the FDC9229BT.
    • Example circuits and design tips are provided to help with implementation.

For more detailed information, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)