Details

---

BUY BUZ355 https://www.utsource.net/itm/p/12612357.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	4.5	-	5.5	V	-
Input Current	IIN	-	100	500	渭A	VIN = 5V
Output Current (Sink)	IOUT	-	50	100	mA	VCC = 5V, TA = 25掳C
Output Voltage Drop	VCE(sat)	-	0.2	0.4	V	IOUT = 50mA
Maximum Junction Temperature	TJ(max)	-	-	150	掳C	-
Storage Temperature Range	TSTG	-40	-	150	掳C	-
Operating Temperature Range	TA	-40	-	85	掳C	-

Instructions for Using BUZ355

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Input Current:

   • The input current (I_IN) should be between 100渭A and 500渭A for reliable operation. Higher currents can cause excessive power dissipation and potential damage.

3. Output Current:

   • The output current (I_OUT) should not exceed 100mA to prevent overheating and potential failure. The typical operating current is around 50mA.

4. Output Voltage Drop:

   • The voltage drop across the output transistor (V_CE(sat)) is typically 0.2V at 50mA. This value can increase to 0.4V under maximum load conditions.

5. Temperature Management:

   • Monitor the junction temperature (T_J) to ensure it does not exceed 150掳C. Use appropriate heat sinks or cooling methods if necessary.
   • Store the device in an environment where the temperature ranges from -40掳C to 150掳C.
   • Operate the device within the ambient temperature range of -40掳C to 85掳C to ensure optimal performance.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

7. Mounting:

   • Ensure proper mounting and soldering techniques to avoid mechanical stress on the device.
   • Use a suitable PCB layout to minimize noise and interference.

By following these parameters and instructions, you can ensure reliable and efficient operation of the BUZ355 transistor.

(For reference only)