Details

---

BUY JS1F-24V-F https://www.utsource.net/itm/p/12612359.html

Parameter	Description	Value
Part Number	Product code	JS1F-24V-F
Type	Relay	SPDT (Single Pole, Double Throw)
Coil Voltage	Nominal coil voltage	24V DC
Coil Power Consumption	Power consumption at nominal voltage	0.36W
Coil Resistance	Resistance at 25掳C	667惟
Contact Form	Configuration of contacts	1C/O + 1C/C
Contact Rating	Maximum switching capacity	10A @ 250VAC
Insulation Resistance	Minimum insulation resistance between contacts	100M惟 (500VDC)
Dielectric Strength	Withstand voltage between contacts	1000VAC for 1 minute
Operating Temperature	Range of ambient temperature for operation	-40掳C to 85掳C
Storage Temperature	Range of ambient temperature for storage	-40掳C to 85掳C
Humidity	Relative humidity range	5% to 95% RH
Mechanical Life	Expected number of operations without load	10 million cycles
Electrical Life	Expected number of operations under rated load	100,000 cycles
Terminal Type	Connection method for wires	Solder lug
Mounting	Method of installation	PC board mount
Dimensions	Size of the relay	17.5mm x 12.5mm x 10mm
Weight	Mass of the relay	4g

Instructions:

1. Installation:

   • Ensure the relay is installed on a suitable PCB or mounting surface.
   • Connect the coil terminals to the 24V DC power supply.
   • Connect the load to the appropriate contact terminals (Common, Normally Open, Normally Closed).

2. Operation:

   • Apply 24V DC to the coil terminals to energize the relay.
   • When the coil is energized, the common contact will switch from the normally closed (NC) position to the normally open (NO) position.
   • When the coil is de-energized, the common contact will return to the NC position.

3. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Ensure the operating environment is within the specified temperature and humidity ranges.
   • If the relay is used in a high-vibration environment, periodically check the connections for tightness.

4. Safety:

   • Do not exceed the maximum contact ratings to avoid damage or failure.
   • Ensure proper insulation and isolation when handling high voltages.
   • Follow all local electrical codes and regulations.

(For reference only)