Details

---

BUY 832A-1C-S https://www.utsource.net/itm/p/12612360.html

Parameter	Description	Value
Part Number	Full part number	832A-1C-S
Type	Relay Type	SPDT
Coil Voltage	Operating voltage of the coil	24VDC
Coil Power	Power consumption of the coil	0.6W
Contact Form	Configuration of the contacts	1C/O (SPDT)
Contact Rating	Maximum current and voltage for contacts	10A, 250VAC
Insulation	Dielectric strength between contacts and coil	1000VAC
Operating Temp	Temperature range for operation	-40掳C to 85掳C
Storage Temp	Temperature range for storage	-40掳C to 125掳C
Dimensions	Size of the relay	17.5mm x 12.5mm x 10.5mm
Weight	Weight of the relay	5g
Mounting	Method of mounting	PCB mount
Termination	Connection method for leads	Solder lugs

Instructions

1. Installation:

   • Ensure the relay is installed in a location that meets the operating temperature requirements.
   • Mount the relay on a PCB using the provided solder lugs.
   • Verify that the PCB layout allows for proper heat dissipation.

2. Wiring:

   • Connect the coil terminals to the appropriate control circuit.
   • Connect the load to the normally open (NO) and common (COM) terminals.
   • Connect the normally closed (NC) terminal if needed for fail-safe operations.

3. Operation:

   • Apply the rated coil voltage to energize the relay.
   • The NO contact will close and the NC contact will open when the coil is energized.
   • When the coil is de-energized, the contacts will return to their default positions.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Ensure that the contacts are clean and free from corrosion.
   • Replace the relay if it fails to operate correctly or shows signs of excessive wear.

5. Safety:

   • Do not exceed the maximum contact ratings.
   • Ensure the relay is properly isolated from high-voltage circuits.
   • Follow all relevant safety guidelines and regulations when handling and installing the relay.

(For reference only)