Details

---

BUY 892-1CC-C-12VDC https://www.utsource.net/itm/p/12612423.html

Parameter	Value
Part Number	892-1CC-C-12VDC
Type	Relay
Voltage	12V DC
Coil Power	1.44W
Coil Resistance	100惟
Contact Form	SPDT (Single Pole, Double Throw)
Contact Rating	10A at 250V AC
Switching Capacity	10A at 250V AC, 10A at 30V DC
**Insulation Resistance	100M惟 at 500V DC
Dielectric Strength	1500V AC for 1 minute
**Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Weight	15g
Dimensions	17.5mm x 12.5mm x 10mm

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Mount the relay on a flat, stable surface to avoid mechanical stress.

2. Wiring:

   • Connect the coil terminals to a 12V DC power supply.
   • Connect the common (COM) terminal to the load circuit.
   • Connect the normally open (NO) and normally closed (NC) terminals as required by your application.

3. Operation:

   • When 12V DC is applied to the coil, the relay will switch the contacts from NC to NO.
   • When the power is removed, the relay will return to its default state (NC).

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a soft, dry cloth to remove dust and debris.

5. Safety:

   • Do not exceed the rated voltage or current to avoid damage to the relay.
   • Ensure proper grounding to prevent electrical shock.
   • Use appropriate fuses or circuit breakers to protect the relay and connected circuits.

(For reference only)