Details

---

BUY BQ24050DSQT https://www.utsource.net/itm/p/12612469.html

Parameter	Description	Min	Typ	Max	Unit
Input Voltage (VIN)	Operating input voltage range	3.0	-	6.0	V
Output Voltage (VOUT)	Battery regulation voltage	4.2	-	-	V
Charging Current (ICHG)	Maximum charging current	-	1.0	1.5	A
Quiescent Current (IQ)	Operating quiescent current	-	80	-	渭A
Thermal Shutdown Temperature (TSD)	Temperature at which the device shuts down to prevent overheating	-	-	150	掳C
Battery Temperature Monitoring (TMON)	Temperature monitoring range for battery	-40	-	85	掳C
Battery Pre-charge Current (IPRECHG)	Pre-charge current for deeply discharged batteries	-	0.1	-	A
Charge Termination Current (ITERM)	Charge termination current	-	0.1	-	A
Charge Time Limit (TCHG)	Maximum charge time before terminating charge	-	-	12	hours
Fault Response Time (TFault)	Time to detect and respond to faults	-	1.5	-	s

Instructions:

1. Power Supply Connection:

   • Connect the input power supply (VIN) within the specified range (3.0V to 6.0V).
   • Ensure the power supply is stable and free from noise.

2. Battery Connection:

   • Connect the battery to the VOUT pin.
   • The battery should be capable of handling the maximum charging current (1.5A).

3. Charging Configuration:

   • Set the charging current using an external resistor connected to the ISET pin.
   • For typical applications, set the charging current to 1.0A.

4. Thermal Management:

   • Place the device in a well-ventilated area to avoid overheating.
   • Monitor the temperature to ensure it does not exceed 150掳C.

5. Temperature Monitoring:

   • Use an external thermistor or other temperature sensor to monitor the battery temperature.
   • Ensure the battery temperature remains within the safe range (-40掳C to 85掳C).

6. Pre-charge and Termination:

   • The device will automatically pre-charge the battery if the voltage is below the threshold.
   • Charging will terminate when the current drops below the termination current (0.1A) or after 12 hours.

7. Fault Handling:

   • The device will detect and respond to faults within 1.5 seconds.
   • Check the fault status and take appropriate action if necessary.

8. Quiescent Current:

   • The device operates with a low quiescent current of 80渭A to minimize power consumption.

9. Safety Considerations:

   • Always follow safety guidelines for handling lithium-ion batteries.
   • Do not short-circuit the battery or connect it in reverse polarity.

10. Testing and Validation:

    • Perform initial testing with a known good battery and verify all parameters.
    • Validate the charging process and ensure the battery is charged correctly.

(For reference only)