Details

---

BUY SI7461DP-T1-E3 https://www.utsource.net/itm/p/12612487.html

Parameter	Description	Min	Typ	Max	Unit
VDD	Supply Voltage	1.65	-	5.5	V
IDD	Supply Current (Quiescent)	-	200	-	μA
fIN	Input Frequency	10	-	100	kHz
fOUT	Output Frequency	10	-	100	kHz
VIH	Input High Voltage	0.7 × VDD	-	VDD	V
VIL	Input Low Voltage	0	-	0.3 × VDD	V
VOH	Output High Voltage	0.9 × VDD	-	VDD	V
VOL	Output Low Voltage	0	-	0.1 × VDD	V
tpd	Propagation Delay Time	-	100	-	ns
tr	Rise Time	-	50	-	ns
tf	Fall Time	-	50	-	ns
Operating Temperature Range	-	-40	-	85	°C
Storage Temperature Range	-	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the range of 1.65V to 5.5V.
   • The quiescent current (I_DD) should not exceed 200 μA.

2. Input Signal:

   • The input frequency (f_IN) should be between 10 kHz and 100 kHz.
   • The input high voltage (V_IH) should be at least 0.7 times the supply voltage (V_DD).
   • The input low voltage (V_IL) should not exceed 0.3 times the supply voltage (V_DD).

3. Output Signal:

   • The output frequency (f_OUT) will match the input frequency.
   • The output high voltage (V_OH) should be at least 0.9 times the supply voltage (V_DD).
   • The output low voltage (V_OL) should not exceed 0.1 times the supply voltage (V_DD).

4. Timing Parameters:

   • The propagation delay time (t_pd) is typically 100 ns.
   • The rise time (t_r) and fall time (t_f) are both typically 50 ns.

5. Temperature Ranges:

   • The operating temperature range is from -40°C to 85°C.
   • The storage temperature range is from -65°C to 150°C.

6. Handling and Storage:

   • Store the device in a dry, cool environment to avoid damage.
   • Handle with care to prevent electrostatic discharge (ESD) damage. Use proper ESD protection measures.

7. Mounting and Soldering:

   • Follow recommended soldering profiles to ensure reliable connections.
   • Avoid excessive heat during soldering to prevent thermal damage.

8. Testing:

   • Test the device under specified operating conditions to ensure proper functionality.
   • Use appropriate test equipment and methods to validate performance parameters.

(For reference only)