Details

---

BUY BUK9217-75B,118 https://www.utsource.net/itm/p/12612489.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Continuous Drain Current	ID	-	40	-	A	Ta = 25°C
Pulse Drain Current	IDpeak	-	60	-	A	Tc = 25°C, t = 10 μs, duty cycle < 1%
Gate-Source Voltage	VGS	-10	-	10	V
Drain-Source Breakdown Voltage	V(BR)DSS	75	-	-	V
Gate-Source Threshold Voltage	VGS(th)	1.0	1.5	2.5	V	ID = 1 mA, Ta = 25°C
On-State Resistance	RDS(on)	-	0.035	-	Ω	VGS = 10 V, ID = 40 A, Ta = 25°C
Total Power Dissipation	PD	-	160	-	W	Ta = 25°C
Junction Temperature	TJ	-55	-	150	°C
Storage Temperature Range	TSTG	-55	-	150	°C

Instructions:

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid damage.
   • Use appropriate heat sinks to manage thermal dissipation, especially when operating at high currents or power levels.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Ensure that the gate-source voltage (VGS) does not exceed the maximum rating of ±10 V to prevent damage to the gate oxide.

3. Thermal Management:

   • The device can dissipate up to 160 W of power at room temperature (Ta = 25°C). Use adequate cooling solutions such as heatsinks or forced air cooling to maintain the junction temperature within safe limits (TJ ≤ 150°C).

4. Operating Conditions:

   • The continuous drain current (ID) is rated for 40 A at 25°C ambient temperature. For higher temperatures, derate the current accordingly.
   • The pulse drain current (IDpeak) can reach 60 A under specific conditions (Tc = 25°C, t = 10 μs, duty cycle < 1%).

5. Storage and Environmental Conditions:

   • Store the device in a dry environment within the storage temperature range of -55°C to 150°C.
   • Avoid exposure to excessive humidity and corrosive environments.

6. Testing and Verification:

   • Before final assembly, verify the electrical parameters using a suitable test setup.
   • Ensure that the on-state resistance (RDS(on)) is within the specified range for the given gate-source voltage (VGS) and drain current (ID).

7. Safety Precautions:

   • Always use proper ESD protection when handling the device to prevent electrostatic discharge damage.
   • Follow all relevant safety guidelines and regulations during installation and operation.

(For reference only)