Details

---

BUY SRM2016C12 https://www.utsource.net/itm/p/12612498.html

Parameter	Value	Unit
Capacitance	12	pF
Voltage Rating	50	V
Tolerance	卤5	%
Operating Temp.	-55 to +125	掳C
Case Size	2016	mm
Mounting Type	Surface Mount	-
Dielectric	X7R	-
Insulation Resistance	1000	M惟
Dissipation Factor	1.0	%

Instructions:

1. Handling: Handle the SRM2016C12 with care to avoid mechanical damage or static discharge.
2. Soldering: Use a soldering temperature of 260掳C for no more than 10 seconds. Ensure the board is preheated to 150掳C to minimize thermal shock.
3. Storage: Store in a dry environment to prevent moisture absorption. Use within 6 months of opening the packaging.
4. Mounting: Place the component on the PCB with the correct polarity if applicable. Ensure the pads are clean and free of contaminants.
5. Inspection: After soldering, inspect the component for proper alignment and solder joint quality. Use a magnifying glass or microscope if necessary.
6. Testing: Test the capacitance and insulation resistance using appropriate test equipment to ensure the component meets specifications.
7. Disposal: Dispose of any defective components according to local environmental regulations.

(For reference only)