Details

---

BUY AM6072DC https://www.utsource.net/itm/p/12612502.html

Below is the parameter table and instructions for the AM6072DC component:

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	4.5	5.0	5.5	V
Operating Temperature	Ta	-40		85	°C
Storage Temperature	Tstg	-65		150	°C
Output Current (Continuous)	Iout	0	2.0	3.0	A
Quiescent Current	Iq	0.5	1.0	1.5	mA
Dropout Voltage	Vdo	0.2	0.3	0.5	V
Load Regulation	ΔVout/ΔIout		0.01		%/A
Line Regulation	ΔVout/ΔVin		0.01		%/V
Ripple Rejection	RR		60		dB
Thermal Resistance (θJA)	θJA		50		°C/W
Package Type			TO-220

Instructions

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the Vcc pin.
   • Connect the negative terminal of the power supply to the GND pin.

2. Output Connection:

   • Connect the load to the Vout pin.
   • Ensure the load current does not exceed the maximum output current (3.0 A).

3. Heat Dissipation:

   • For continuous operation at high output currents, ensure proper heat dissipation by using a heatsink.
   • The thermal resistance (θJA) is 50°C/W, so calculate the required heatsink size based on the expected power dissipation.

4. Capacitors:

   • Use a 10 μF electrolytic capacitor between Vcc and GND to filter input noise.
   • Use a 10 μF electrolytic capacitor between Vout and GND to stabilize the output voltage.

5. Operating Temperature:

   • The device can operate within the temperature range of -40°C to 85°C.
   • Store the device in a temperature range of -65°C to 150°C.

6. Load Regulation:

   • The load regulation is 0.01% per ampere. Ensure that the load changes do not cause significant voltage variations.

7. Line Regulation:

   • The line regulation is 0.01% per volt. Ensure that the input voltage changes do not cause significant output voltage variations.

8. Ripple Rejection:

   • The device provides 60 dB ripple rejection. Use appropriate filtering capacitors to further reduce ripple if necessary.

9. ** Dropout Voltage:**

   • The dropout voltage is 0.3 V typical. Ensure that the input voltage is at least 0.3 V higher than the desired output voltage.

10. Quiescent Current:

    • The quiescent current is 1.0 mA typical. This is the current drawn by the device when no load is connected.

By following these instructions, you can ensure optimal performance and reliability of the AM6072DC component.

(For reference only)