Details

---

BUY K428A4002 https://www.utsource.net/itm/p/12613776.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	4.5	5.0	5.5	V	Operating supply voltage
Output Current	Iout	-	100	200	mA	Maximum continuous output current
Quiescent Current	Iq	0.1	0.5	1.0	mA	Current consumed by the device when idle
Operating Temperature	Toper	-40	-	85	°C	Range of temperatures for normal operation
Storage Temperature	Tstg	-65	-	150	°C	Range of temperatures for storage
Input Capacitance	Cin	-	10	20	pF	Capacitance at input pins
Output Capacitance	Cout	-	5	10	pF	Capacitance at output pins
Propagation Delay Time	tpd	5	10	15	ns	Time delay from input to output
Rise Time	tr	3	5	7	ns	Time to rise from 10% to 90%
Fall Time	tf	3	5	7	ns	Time to fall from 90% to 10%

Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the specified range of 4.5V to 5.5V to avoid damage or improper operation.

2. Output Current (Iout):

   • The device can provide up to 200mA continuously. Ensure that the load does not exceed this limit to prevent overheating or failure.

3. Quiescent Current (Iq):

   • The device consumes a small amount of current even when idle. This is typically between 0.1mA and 1.0mA.

4. Operating Temperature (Toper):

   • The device is designed to operate within the temperature range of -40°C to 85°C. Operating outside this range may lead to reduced performance or failure.

5. Storage Temperature (Tstg):

   • Store the device in an environment where the temperature ranges from -65°C to 150°C to ensure long-term reliability.

6. Input and Output Capacitance (Cin, Cout):

   • The input and output capacitances should be considered when designing the circuit to ensure stability and proper signal integrity.

7. Propagation Delay Time (tpd):

   • The time delay from input to output is between 5ns and 15ns. This is important for timing considerations in high-speed applications.

8. Rise and Fall Time (tr, tf):

   • The rise and fall times are between 3ns and 7ns. These values are crucial for ensuring that the device meets the timing requirements of your application.

Additional Notes:

• Always refer to the datasheet for more detailed information and specific application notes.
• Ensure proper decoupling capacitors are used near the power supply pins to maintain stable operation.
• Follow recommended PCB layout guidelines to minimize noise and interference.

(For reference only)