Details

---

BUY PM20CEE060-5 https://www.utsource.net/itm/p/12613852.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Input Voltage	VIN	4.5	-	40	V
Output Voltage	VOUT	0.8	-	13.2	V	Adjustable
Output Current	IOUT	-	5	-	A	Continuous
Efficiency	η	-	92	-	%	At nominal conditions
Switching Frequency	fSW	-	650	-	kHz	Fixed
Quiescent Current	IQ	-	30	-	μA	Shutdown mode
Load Regulation	ΔVOUT	-	0.2	-	%	From 0 to full load
Line Regulation	ΔVOUT	-	0.1	-	%	Over input voltage range
Dropout Voltage	VDROPOUT	-	0.8	-	V	At full load
Operating Temperature	Toper	-40	-	125	°C	Junction temperature
Storage Temperature	Tstg	-40	-	150	°C
Package	-	-	DIP-8	-

Instructions:

1. Input Voltage (VIN): Ensure the input voltage is within the specified range of 4.5V to 40V.
2. Output Voltage (VOUT): Adjust the output voltage using the external resistor network. The adjustable range is from 0.8V to 13.2V.
3. Output Current (IOUT): The device can provide a continuous output current of up to 5A.
4. Efficiency (η): The efficiency is typically 92% under nominal operating conditions.
5. Switching Frequency (fSW): The switching frequency is fixed at 650kHz.
6. Quiescent Current (IQ): In shutdown mode, the quiescent current is approximately 30μA.
7. Load Regulation (ΔVOUT): The load regulation is ±0.2% over the entire load range.
8. Line Regulation (ΔVOUT): The line regulation is ±0.1% over the entire input voltage range.
9. Dropout Voltage (VDROPOUT): The dropout voltage is 0.8V at full load.
10. Operating Temperature (Toper): The device operates reliably within a junction temperature range of -40°C to 125°C.
11. Storage Temperature (Tstg): Store the device in an environment with temperatures ranging from -40°C to 150°C.
12. Package: The PM20CEE060-5 is available in a DIP-8 package.

Additional Notes:

• Always ensure proper heat sinking for high current applications to maintain the junction temperature within safe limits.
• Use appropriate input and output capacitors to stabilize the circuit and filter out noise.
• Refer to the datasheet for detailed application circuits and design guidelines.

(For reference only)