Details

---

BUY CM150DY-12NF https://www.utsource.net/itm/p/12613853.html

Parameter	Value
Part Number	CM150DY-12NF
Type	MOSFET
Polarity	N-Channel
VDSS (Max Drain-Source Voltage)	150 V
RDS(on) (On-State Resistance)	12 mΩ (at VGS = 10 V)
ID (Continuous Drain Current)	60 A (at TC = 25°C)
ID (Pulsed Drain Current)	180 A (tp = 10 μs, IDM = 1.5 × ID)
Power Dissipation (PTOT)	360 W (at TC = 25°C)
Gate Charge (QG)	90 nC (at VGS = 10 V)
Input Capacitance (Ciss)	2700 pF (at VDS = 15 V, f = 1 MHz)
Output Capacitance (Coss)	450 pF (at VDS = 15 V, f = 1 MHz)
Total Capacitance (Crss)	225 pF (at VDS = 15 V, f = 1 MHz)
Operating Temperature Range (TJ)	-55°C to +150°C
Storage Temperature Range (TSTG)	-55°C to +150°C
Package	TO-247-3

Instructions for Use:

1. Handling Precautions:

   • Avoid static discharge by using proper ESD protection.
   • Handle the device by the edges or leads to avoid damage.

2. Mounting:

   • Ensure the heatsink is properly attached to the device to dissipate heat effectively.
   • Use thermal paste between the device and heatsink to improve thermal conductivity.

3. Biasing:

   • Apply a gate-source voltage (V_GS) of at least 10 V to ensure the MOSFET is fully on.
   • Do not exceed the maximum gate-source voltage (V_GS(max)) of ±20 V.

4. Operation:

   • Monitor the junction temperature (T_J) to ensure it does not exceed 150°C.
   • Ensure the drain current (I_D) does not exceed the continuous or pulsed ratings.

5. Testing:

   • Use a curve tracer or similar equipment to verify the device parameters.
   • Perform tests under controlled conditions to avoid damaging the device.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Keep the device in its original packaging until ready for use.

7. Soldering:

   • Use a temperature-controlled soldering iron to avoid overheating.
   • Follow the recommended soldering profile to ensure reliable connections.

For detailed application notes and further information, refer to the datasheet provided by the manufacturer.

(For reference only)