Details

---

BUY 3296W 20R 200 https://www.utsource.net/itm/p/12613864.html

Parameter	Value
Part Number	3296W 20R 200
Type	Potentiometer
Resistance	200 k惟
Tolerance	卤20%
Power Rating	0.5 W
Operating Temperature	-40掳C to +85掳C
Rotation	300掳
Body Diameter	7 mm
Shaft Diameter	3.5 mm
Shaft Length	5 mm
Termination Style	Solder Lug
Material	Carbon Composition

Instructions:

1. Handling:

   • Handle with care to avoid damage to the potentiometer.
   • Do not apply excessive force to the shaft or terminals.

2. Installation:

   • Solder the potentiometer to the PCB or wiring using a soldering iron set to a maximum temperature of 350掳C.
   • Ensure that the solder joints are clean and free of flux residue.
   • Allow the potentiometer to cool naturally after soldering.

3. Operation:

   • Rotate the shaft gently to adjust the resistance.
   • Avoid rotating the shaft beyond its specified rotation range (300掳) to prevent damage.

4. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive materials.
   • Keep in original packaging until ready for use to protect from static and physical damage.

5. Maintenance:

   • Periodically check for any signs of wear or damage.
   • Clean the potentiometer with a soft, dry cloth if necessary. Avoid using solvents or abrasive materials.

(For reference only)