Details

---

BUY IHW20N135R5,H20PR5 https://www.utsource.net/itm/p/12613903.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Drain-Source On-State Resistance at 25°C	RDS(on)	-	135	-	mΩ	VGS = 10V, ID = 20A
Drain-Source On-State Resistance at 125°C	RDS(on)	-	200	-	mΩ	VGS = 10V, ID = 20A
Continuous Drain Current	ID	-	-	20	A	TC = 25°C
Pulse Drain Current (tp = 10ms)	ID(p)	-	-	40	A	TC = 25°C
Gate-Source Voltage	VGS	-10	-	10	V	-
Drain-Source Breakdown Voltage	VDS(BR)	-	-	650	V	ID = 250μA
Gate-Threshold Voltage	VGS(th)	2.0	4.0	6.0	V	ID = 250μA, TA = 25°C
Total Power Dissipation	PTOT	-	-	160	W	TC = 25°C
Junction Temperature	TJ	-55	-	175	°C	-
Storage Temperature Range	TSTG	-55	-	150	°C	-

Instructions:

1. Mounting:

   • Ensure proper heat sinking to maintain junction temperature within specified limits.
   • Use recommended PCB layout for optimal thermal performance.

2. Biasing:

   • Apply gate-source voltage (V_GS) within the specified range to avoid damage.
   • For reliable operation, ensure V_GS is at least 10V to fully turn on the device.

3. Current Handling:

   • Do not exceed the continuous drain current (I_D) or pulse drain current (I_D(p)) ratings.
   • For pulse operation, ensure the pulse width does not exceed 10ms to avoid thermal stress.

4. Voltage Ratings:

   • Ensure the drain-source voltage (V_DS) does not exceed the breakdown voltage (V_DS(BR)).
   • Keep the gate-source voltage (V_GS) within the specified limits to prevent gate damage.

5. Thermal Management:

   • Monitor the junction temperature (T_J) to ensure it stays within the operating range.
   • Use appropriate cooling methods such as heatsinks or forced air cooling to manage heat dissipation.

6. Storage:

   • Store the device in a dry environment with temperatures between -55°C and 150°C to prevent damage.

7. Handling:

   • Handle the device with care to avoid mechanical damage.
   • Use ESD protection to prevent static damage during handling and installation.

8. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Regularly inspect the device for signs of wear or damage.

(For reference only)