Details

---

BUY RD00HVS1 https://www.utsource.net/itm/p/12614253.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Input Voltage	VIN	4.5	-	36	V	Operating Range
Output Voltage	VOUT	-	5	-	V	Fixed Output
Output Current	IOUT	-	1	3	A	Continuous
Quiescent Current	IQ	-	20	-	μA	No Load, VIN = 12V
Dropout Voltage	VDROPOUT	-	1.2	-	V	IOUT = 3A
Efficiency	η	-	85	-	%	VIN = 12V, VOUT = 5V, IOUT = 3A
Ripple Voltage	VRIPPLE	-	30	-	mVpp	VIN = 12V, VOUT = 5V, IOUT = 3A
Operating Temperature	TOPR	-40	-	125	°C	Storage and Operation
Storage Temperature	TSTG	-65	-	150	°C	Storage Only

Instructions for Use:

1. Input Connection:

   • Connect the input voltage (VIN) to the positive terminal of the RD00HVS1.
   • Ensure the input voltage is within the operating range of 4.5V to 36V.

2. Output Connection:

   • Connect the output voltage (VOUT) to the load or circuit requiring a stable 5V supply.
   • The maximum continuous output current is 3A.

3. Ground Connection:

   • Connect the ground (GND) of the input and output to a common ground point.

4. Heat Dissipation:

   • For high output currents, ensure adequate heat dissipation by using a heatsink or mounting the device on a large copper area.

5. Capacitors:

   • Use input and output capacitors to stabilize the voltage and reduce ripple.
   • Recommended values: 10μF ceramic capacitor on the input and 10μF ceramic capacitor on the output.

6. Efficiency:

   • The efficiency is maximized at higher input voltages and lower output currents. For optimal performance, keep the input voltage as close to the output voltage as possible.

7. Operating Environment:

   • Operate the device within the specified temperature range to avoid damage and ensure reliable operation.

8. Storage:

   • Store the device in a dry environment within the storage temperature range to prevent degradation.

9. Testing:

   • Before integrating the RD00HVS1 into a final design, test it under various conditions to ensure it meets the required specifications.

(For reference only)