Details

---

BUY TS3021ICT https://www.utsource.net/itm/p/12614435.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	1.6	-	5.5	V	Operating voltage range
Input Voltage Range	VIN	0	-	VDD	V	Range for valid input voltages
Output Current	IOUT	-	100	150	mA	Maximum continuous output current
Quiescent Current	IQ	-	10	20	μA	Current consumed by the device itself
Dropout Voltage	VDROPOUT	-	200	400	mV	Voltage difference between VIN and VOUT at full load
Thermal Shutdown	TSD	-	150	170	°C	Temperature at which the device shuts down to prevent damage
Operating Temperature	TOPR	-40	-	85	°C	Ambient temperature range
Storage Temperature	TSTG	-65	-	150	°C	Temperature range for storage

Instructions:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 1.6V to 5.5V.
   • Connect the power supply to the VDD pin and ground (GND) pin.

2. Input and Output Connections:

   • Connect the input signal to the VIN pin.
   • Connect the output load to the VOUT pin.
   • Ensure the input voltage (VIN) is within the range of 0V to VDD.

3. Current Limiting:

   • The maximum continuous output current (IOUT) is 150mA. Avoid exceeding this limit to prevent damage to the device.

4. Thermal Management:

   • The device will shut down if the temperature exceeds 150°C to prevent thermal damage.
   • Ensure adequate heat dissipation, especially under high current conditions.

5. Operating Temperature:

   • The device is designed to operate in ambient temperatures ranging from -40°C to 85°C.
   • Store the device in temperatures ranging from -65°C to 150°C.

6. Quiescent Current:

   • The quiescent current (IQ) is typically 10μA and can go up to 20μA. This is the current consumed by the device itself when it is active but not driving any load.

7. Dropout Voltage:

   • The dropout voltage (VDROPOUT) is the minimum voltage difference between VIN and VOUT required to maintain regulation. It typically ranges from 200mV to 400mV at full load.

8. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Store the device in a dry, cool environment to ensure its longevity.

By following these parameters and instructions, you can ensure optimal performance and reliability of the TS3021ICT.

(For reference only)