Details

---

BUY IXTP24N65X2 https://www.utsource.net/itm/p/12614872.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Maximum Drain-Source Voltage	VDS(max)	-	650	-	V	-
Maximum Gate-Source Voltage	VGS(max)	-20	0	20	V	-
Continuous Drain Current (TC = 25掳C)	ID(25掳C)	-	24	-	A	-
Continuous Drain Current (TC = 100掳C)	ID(100掳C)	-	18	-	A	-
Pulse Drain Current (TC = 25掳C, 10 渭s)	IDpeak	-	120	-	A	-
Total Power Dissipation (TC = 25掳C)	PTOT(25掳C)	-	300	-	W	-
Total Power Dissipation (TC = 100掳C)	PTOT(100掳C)	-	150	-	W	-
Junction Temperature	TJ	-	-	175	掳C	-
Storage Temperature Range	TSTG	-55	-	150	掳C	-
Thermal Resistance, Junction to Case	R胃JC	-	0.4	-	掳C/W	-
Thermal Resistance, Junction to Ambient	R胃JA	-	40	-	掳C/W	-

Instructions for Use:

1. Handling and Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle with care to avoid damage to the leads and the body of the device.

2. Mounting:

   • Ensure proper heat sinking to manage thermal resistance and maintain junction temperature within safe limits.
   • Use appropriate mounting hardware and thermal paste to enhance thermal conductivity.

3. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Apply gate-source voltage (V_GS) within the specified range to control the device.
   • Ensure that the maximum drain-source voltage (V_DS(max)) is not exceeded.

4. Operational Considerations:

   • Monitor the continuous drain current (I_D) and pulse drain current (I_Dpeak) to avoid exceeding the rated values.
   • Keep the total power dissipation (P_TOT) within the specified limits to prevent overheating.
   • Regularly check the junction temperature (T_J) to ensure it does not exceed 175掳C.

5. Testing:

   • Perform initial testing at room temperature (25掳C) to verify performance.
   • Gradually increase the load and monitor the device parameters to ensure stable operation under all conditions.

6. Safety:

   • Always use appropriate safety measures when handling high voltages and currents.
   • Follow all relevant electrical and mechanical standards and regulations.

(For reference only)