Details

---

BUY L9302 https://www.utsource.net/itm/p/12616289.html

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	V_IN	2.5	-	5.5	V
Output Voltage	V_OUT	-	3.3	-	V
Output Current	I_OUT	-	150	250	mA
Quiescent Current	I_Q	-	40	-	渭A
Dropout Voltage	V_DROPOUT	-	280	-	mV
Operating Temperature	T_OP	-40	-	85	掳C
Storage Temperature	T_STG	-40	-	150	掳C

Instructions for L9302:

1. Input Voltage Range: Ensure the input voltage is within the specified range of 2.5V to 5.5V. Exceeding this range can damage the device.

2. Output Configuration: The L9302 provides a fixed output voltage of 3.3V. No external components are required for setting the output voltage.

3. Load Regulation: The regulator can supply up to 250mA of output current. For higher currents, ensure adequate heat dissipation.

4. Quiescent Current: The quiescent current is very low at 40渭A, making it suitable for battery-operated devices.

5. Thermal Considerations: The operating temperature range is from -40掳C to 85掳C. For applications outside this range, consider additional thermal management techniques.

6. Installation: Place the L9302 close to the load and use short leads to minimize noise and improve stability.

7. Capacitors: Use appropriate input and output capacitors as recommended in the datasheet to ensure stability and reduce ripple.

8. Storage: Store the device in an environment where temperatures do not exceed 150掳C to avoid damaging the component.

(For reference only)