Details

---

BUY CM100TU-24H https://www.utsource.net/itm/p/12616429.html

Below is the parameter table and instructions for the CM100TU-24H Thyristor:

Parameter Table

Parameter	Symbol	Value	Unit
Rated RMS Voltage	VDRM	1000	V
Repetitive Peak Off-State Voltage	VDRM	1200	V
Non-Repetitive Peak Off-State Voltage	VDRRM	1400	V
Rated RMS On-State Current	IT(RMS)	24	A
Non-Repetitive Peak On-State Current	ITSM	360	A
Gate Trigger Current	IGT	50	mA
Gate Trigger Voltage	VGT	2	V
On-State Voltage Drop	VT	1.2	V
Junction Temperature	Tj	-40 to +125	°C
Storage Temperature	Tstg	-55 to +150	°C
Case Temperature	Tc	-40 to +125	°C
Thermal Resistance (Junction to Case)	Rth(j-c)	0.5	K/W
Thermal Resistance (Junction to Ambient)	Rth(j-a)	2.5	K/W

Instructions

1. Handling and Storage:

   • Handle the CM100TU-24H with care to avoid mechanical damage.
   • Store in a dry, cool place within the temperature range of -55°C to +150°C.

2. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified range.
   • Use appropriate mounting hardware to secure the device firmly.

3. Electrical Connections:

   • Connect the anode (A) and cathode (K) terminals correctly to the circuit.
   • Apply the gate trigger pulse to the gate (G) terminal relative to the cathode (K).

4. Triggering:

   • Apply a gate current of at least 50 mA to ensure reliable triggering.
   • The gate trigger voltage should be at least 2 V.

5. Overcurrent Protection:

   • Implement overcurrent protection to prevent damage from excessive currents.
   • Ensure that the non-repetitive peak on-state current (I_TSM) does not exceed 360 A.

6. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed +125°C.
   • Use a heatsink with adequate thermal resistance to dissipate heat effectively.

7. Testing:

   • Test the device under controlled conditions to verify its performance and reliability.
   • Refer to the datasheet for specific test procedures and recommended test circuits.

8. Safety Precautions:

   • Follow all safety guidelines when handling high-voltage and high-current components.
   • Ensure proper insulation and grounding to prevent electrical hazards.

By following these instructions and parameters, you can ensure optimal performance and longevity of the CM100TU-24H Thyristor.

(For reference only)