Details

---

BUY MCP79410 https://www.utsource.net/itm/p/12616722.html

Parameter	Description	Value/Range
Operating Voltage (VDD)	Supply voltage range	2.0V to 5.5V
Operating Temperature	Temperature range for operation	-40°C to +85°C
RTC Accuracy	Real-time clock accuracy	±2 ppm from -40°C to +85°C
Power Consumption	Current consumption in active mode	300 μA at 3.3V, 1 MHz
Sleep Mode Current	Current consumption in sleep mode	600 nA
RAM Size	Internal RAM size	256 bytes
EEPROM Size	Internal EEPROM size	64 bytes
I2C Interface Speed	Maximum speed of the I2C interface	400 kHz
Package Type	Available package types	SOIC-8, MSOP-10
Calibration Range	Range over which the oscillator can be calibrated	±375 ppm

Instructions for Use:

1. Power Supply: Ensure the supply voltage (VDD) is within the specified range of 2.0V to 5.5V.
2. Temperature Considerations: The device operates accurately between -40°C and +85°C. Avoid exposing it to temperatures outside this range.
3. RTC Initialization: Initialize the real-time clock using the appropriate registers. Refer to the datasheet for register addresses and bit settings.
4. Low-Power Operation: Utilize the sleep mode to minimize power consumption when not actively processing data. Transition to sleep mode by writing to the control register.
5. Data Storage: Use the internal 256-byte RAM for temporary data storage and the 64-byte EEPROM for non-volatile storage. Write operations to EEPROM should be performed carefully to avoid wear-out.
6. I2C Communication: Configure the I2C interface according to the master’s specifications, ensuring not to exceed the maximum speed of 400 kHz.
7. Calibration: Calibrate the oscillator to improve timekeeping accuracy if required. This can be done within the ±375 ppm range.
8. Package Handling: Handle the SOIC-8 or MSOP-10 packages with care to prevent damage to pins and ensure proper soldering.

For detailed programming instructions and specific register configurations, refer to the official MCP79410 datasheet provided by Microchip Technology Inc.

(For reference only)