Details

---

BUY SSA500AA160 https://www.utsource.net/itm/p/12617392.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	4.75	5.0	5.25	V	Operating supply voltage range
Output Voltage	Vo	-	3.3	-	V	Typical output voltage (high)
Input Voltage Range	Vin	0	-	5.0	V	Valid input voltage range for logic levels
Input Current	Iin	-	1.0	-	μA	Typical input current
Output Current	Iout	-	16.0	-	mA	Maximum output current (sink)
Propagation Delay Time	tpd	10	15	20	ns	Propagation delay time from input to output
Power Consumption	Pd	-	100	-	mW	Typical power consumption at Vcc = 5V
Operating Temperature	Topr	-40	-	85	°C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	°C	Storage temperature range

Instructions:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (4.75V to 5.25V) to avoid damage to the device.
   • Use a stable power source to maintain consistent operation.

2. Input Signals:

   • Apply input signals within the valid input voltage range (0V to 5V).
   • Ensure input signals are clean and free from excessive noise to prevent erroneous outputs.

3. Output Handling:

   • The device can sink up to 16mA of current. Do not exceed this limit to avoid damaging the output pins.
   • Use appropriate external components (e.g., resistors, capacitors) to protect the output when driving loads.

4. Propagation Delay:

   • Account for the propagation delay (10ns to 20ns) when designing timing-critical applications.

5. Temperature Considerations:

   • Operate the device within the specified operating temperature range (-40°C to 85°C).
   • Store the device in environments where the temperature does not exceed the storage temperature range (-65°C to 150°C).

6. Power Consumption:

   • Monitor the power consumption to ensure it does not exceed the typical value (100mW) at Vcc = 5V to avoid overheating.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge which can damage sensitive components.
   • Follow proper ESD (Electrostatic Discharge) handling procedures during installation and testing.

(For reference only)