Details

---

BUY 0251.200NRT1 https://www.utsource.net/itm/p/12618223.html

Parameter	Value
Part Number	0251.200NRT1
Description	NPN Transistor
Collector-Emitter Voltage (Vce)	80 V
Emitter-Base Voltage (Veb)	6 V
Collector Current (Ic)	5 A
Power Dissipation (Ptot)	65 W
Operating Temperature Range	-55°C to +150°C
Storage Temperature Range	-65°C to +175°C
Package Type	TO-247
Mounting Type	Through Hole
Lead Finish	Matte Tin

Instructions for Use:

1. Handling:

   • Handle the transistor with care to avoid damage to the leads or the body.
   • Avoid touching the semiconductor part directly to prevent static discharge.

2. Mounting:

   • Ensure that the leads are not bent at sharp angles to prevent mechanical stress.
   • Use a heat sink if the power dissipation is expected to be high.
   • Tighten the mounting screws to the recommended torque specifications to ensure good thermal contact.

3. Electrical Connections:

   • Connect the collector (C) to the positive supply voltage.
   • Connect the emitter (E) to ground.
   • Apply the base (B) signal according to the circuit requirements.
   • Ensure that the maximum ratings for Vce, Veb, Ic, and Ptot are not exceeded.

4. Thermal Management:

   • If the transistor will operate near its maximum power dissipation, use a suitable heat sink to maintain the junction temperature within safe limits.
   • Monitor the temperature during operation to ensure it remains within the specified operating range.

5. Storage:

   • Store the transistor in a dry, cool place away from direct sunlight.
   • Keep the device in its original packaging until ready for use to protect against moisture and static electricity.

6. Testing:

   • Before installing the transistor in a circuit, test it using a multimeter to ensure it is functioning correctly.
   • Check for continuity between the leads as per the datasheet specifications.

(For reference only)