Details

---

BUY CNY17F-2X https://www.utsource.net/itm/p/12618281.html

Parameter	Symbol	Min	Typ	Max	Unit
Forward Voltage (LED)	VF	1.0	1.3	1.6	V
Reverse Voltage (LED)	VR	-	-	5	V
Forward Current (LED)	IF	-	20	50	mA
Peak Pulse Current (LED)	IP	-	-	100	mA
Emitter-Collector Voltage	VEC	-	-	30	V
Collector Current	IC	-	1	5	mA
Collector-Emitter Saturation Voltage	VCE(sat)	-	0.4	0.8	V
Dark Current	ID	-	-	0.1	μA
Isolation Voltage	VIso	-	-	5000	V
Operating Temperature	Top	-40	-	110	°C
Storage Temperature	Tstg	-55	-	150	°C

Instructions for Use:

1. Forward Voltage (V_F):

   • Ensure the supply voltage to the LED is within the specified range to avoid damage or reduced performance.

2. Reverse Voltage (V_R):

   • Do not apply more than 5V in reverse bias to the LED to prevent breakdown.

3. Forward Current (I_F):

   • The typical forward current is 20mA, but it can be increased up to 50mA for higher brightness. Exceeding this value may cause damage.

4. Peak Pulse Current (I_P):

   • For short pulses, the current can be increased to 100mA without damaging the LED.

5. Emitter-Collector Voltage (V_EC):

   • The maximum voltage that can be applied between the emitter and collector is 30V.

6. Collector Current (I_C):

   • The typical collector current is 1mA, with a maximum of 5mA to ensure reliable operation.

7. Collector-Emitter Saturation Voltage (V_CE(sat)):

   • The voltage drop between the collector and emitter when the transistor is saturated should be between 0.4V and 0.8V.

8. Dark Current (I_D):

   • The dark current should not exceed 0.1μA to ensure proper isolation.

9. Isolation Voltage (V_Iso):

   • The device can withstand up to 5000V of isolation voltage, ensuring safe operation in high-voltage environments.

10. Operating Temperature (T_op):

    • The operating temperature range is from -40°C to 110°C. Ensure the device is used within this range to avoid thermal damage.

11. Storage Temperature (T_stg):

    • Store the device in an environment where the temperature ranges from -55°C to 150°C to maintain its integrity.

Additional Notes:

• Always use appropriate heat sinking if the device will be operated at high currents or temperatures.
• Ensure that the circuit design includes necessary current-limiting resistors to protect the LED.
• Follow standard safety guidelines when handling and testing high-voltage circuits.

(For reference only)