Details

---

BUY SX/SLC-40MHZ https://www.utsource.net/itm/p/12618292.html

Parameter	Description	Value
Part Number	Component Identifier	SX/SLC-40MHZ
Type	Crystal Oscillator	-
Frequency	Operating Frequency	40 MHz
Tolerance	Frequency Stability	卤20 ppm
Load Capacitance	External Capacitance for Resonance	18 pF
Drive Level	Maximum Power Consumption	1.0 mW
Operating Temperature Range	Temperature Range for Operation	-40掳C to +85掳C
Storage Temperature Range	Temperature Range for Storage	-55掳C to +125掳C
Supply Voltage	Operating Voltage Range	3.0 V to 5.5 V
Output Type	Output Waveform	Sine Wave
Package Type	Physical Package	SMD
Dimensions	Physical Size (L x W x H)	5.0 x 3.2 x 1.5 mm
Mounting	Mounting Orientation	Any
Compliance	Standards Compliance	RoHS

Instructions for Use

1. Installation:

   • Ensure that the soldering temperature does not exceed 260掳C.
   • Avoid mechanical stress on the oscillator during installation.

2. Circuit Design:

   • Connect the crystal oscillator to the appropriate pins of the microcontroller or circuit.
   • Use the specified load capacitance (18 pF) to achieve the desired frequency stability.
   • Ensure that the supply voltage is within the operating range (3.0 V to 5.5 V).

3. Power Supply:

   • Provide a stable power supply to avoid frequency drift.
   • Use decoupling capacitors close to the power pins to reduce noise.

4. Environmental Considerations:

   • Operate the oscillator within the specified temperature range (-40掳C to +85掳C) to ensure reliable performance.
   • Store the oscillator in a dry environment within the storage temperature range (-55掳C to +125掳C).

5. Handling:

   • Handle the oscillator with care to avoid physical damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

6. Testing:

   • Test the oscillator in a controlled environment to verify its performance.
   • Use a frequency counter or oscilloscope to measure the output frequency and waveform.

7. Maintenance:

   • Regularly inspect the oscillator for any signs of damage or wear.
   • Replace the oscillator if it fails to meet the specified parameters.

(For reference only)