Details

---

BUY AD835ARZ https://www.utsource.net/itm/p/12620406.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		4.75		5.25	V
Operating Temperature	TOPR		-40		+85	°C
Bandwidth	BW	f = 1 MHz, RL = 1 kΩ		130		MHz
Input Offset Voltage	VIO		-0.5	0	+0.5	mV
Output Swing	VOUT	VCC = 5 V	0.5		4.5	V
Power Dissipation	PD	All inputs grounded		65		mW
Large Signal Bandwidth	BWL	f = 1 MHz, RL = 1 kΩ		100		MHz
Input Resistance	RIN			10		MΩ

Instructions for AD835ARZ

1. Power Supply:

   • Ensure the supply voltage is within the range of 4.75V to 5.25V.
   • Use a stable power supply to avoid fluctuations that can affect performance.

2. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to +85°C to ensure reliable operation.

3. Input Signals:

   • Keep input signals within the common-mode voltage range to prevent distortion or damage.
   • For optimal performance, use input resistors to match impedance as required by your application.

4. Output Configuration:

   • The output swing can reach from 0.5V to 4.5V with respect to ground when VCC is 5V.
   • Ensure load resistance (RL) is appropriate to maintain signal integrity and bandwidth.

5. Power Dissipation:

   • Be mindful of power dissipation, which is typically 65mW under normal operating conditions.
   • Design the circuit layout to dissipate heat effectively if operating at higher temperatures or currents.

6. Bandwidth Optimization:

   • To achieve the specified large signal bandwidth of up to 100MHz, ensure all external components are chosen carefully for minimal parasitic effects.

7. Installation and Handling:

   • Handle the device with care to avoid static damage.
   • Follow standard ESD protection procedures during installation and handling.

(For reference only)