Details

---

BUY Z8523010PSC https://www.utsource.net/itm/p/12620524.html

Parameter	Description	Value
Part Number	Component Identifier	Z8523010PSC
Type	Component Type	Diode
Material	Semiconductor Material	Silicon
Maximum Reverse Voltage (Vr)	Maximum voltage that can be applied in reverse direction without breakdown	1000 V
Maximum Forward Current (If)	Maximum current that can flow through the diode in forward direction	1 A
Peak Reverse Current (Irm)	Maximum peak current that can flow in reverse direction during a transient	5 mA
Power Dissipation (Pd)	Maximum power that can be dissipated by the diode	1 W
Operating Temperature Range (Tamb)	Ambient temperature range for operation	-65°C to +175°C
Storage Temperature Range (Tstg)	Temperature range for storage	-65°C to +175°C
Forward Voltage (Vf)	Voltage drop across the diode when conducting in the forward direction at specified current	1.1 V (at 1 A)
Reverse Recovery Time (trr)	Time it takes for the diode to switch from on to off state	50 ns
Package	Physical package type	TO-220
Mounting Type	Method of mounting the component	Through-hole

Instructions:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use proper ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Mounting:

   • Ensure the mounting surface is clean and free of contaminants.
   • Use appropriate thermal paste if high heat dissipation is required.
   • Secure the component firmly to prevent mechanical stress.

3. Soldering:

   • Preheat the component and PCB to reduce thermal shock.
   • Solder at a temperature not exceeding 300°C for no more than 10 seconds per joint.
   • Allow the component to cool naturally after soldering.

4. Testing:

   • Test the diode using a multimeter or diode tester to ensure proper functionality.
   • Check for any short circuits or open circuits before applying power.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging to protect from moisture and physical damage.

6. Operational Considerations:

   • Ensure the operating conditions do not exceed the maximum ratings provided.
   • Use appropriate heatsinks if operating near the maximum power dissipation.
   • Regularly inspect the component for signs of wear or damage during maintenance.

(For reference only)