Details

---

BUY ISL3232ECV-16Z https://www.utsource.net/itm/p/12620575.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Operating Voltage	Vcc	2.7	-	5.5	V
Supply Current (Active)	ICC	-	10	-	mA
Supply Current (Standby)	ICCS	-	1	-	μA
Data Rate	-	-	480	-	Mbps	Full-Speed USB 2.0
Differential Input Level	VID	200	-	600	mV
Differential Output Level	VOD	350	-	600	mV
Common-Mode Input Range	VICR	-	0	3.6	V
Common-Mode Output Range	VOCR	0	-	3.6	V
Propagation Delay	tpd	-	3	-	ns
Skew	tskew	-	0.2	-	ns
Jitter	tj	-	20	-	ps	RMS
Operating Temperature Range	Toper	-40	-	85	°C
Storage Temperature Range	Tstg	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 2.7V to 5.5V.
   • Connect a decoupling capacitor (typically 0.1μF) close to the power pins to minimize noise.

2. Data Lines:

   • The ISL3232ECV-16Z supports full-speed USB 2.0 data rates up to 480 Mbps.
   • Ensure differential input levels (VID) are between 200mV and 600mV and differential output levels (VOD) are between 350mV and 600mV.

3. Common-Mode Levels:

   • The common-mode input range (VICR) should be between 0V and 3.6V.
   • The common-mode output range (VOCR) will also be between 0V and 3.6V.

4. Timing:

   • The propagation delay (tpd) is typically 3ns.
   • Ensure that the skew (tskew) between differential pairs is less than 0.2ns to maintain signal integrity.

5. Jitter:

   • The jitter (tj) should be kept below 20ps RMS to avoid data corruption.

6. Temperature:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Store the device within the temperature range of -65°C to 150°C.

7. Handling:

   • Handle the device with care to avoid electrostatic discharge (ESD).
   • Follow proper soldering techniques to ensure reliable connections.

8. Package:

   • The ISL3232ECV-16Z is available in a 16-pin TSSOP package.
   • Refer to the datasheet for detailed pinout information and mechanical dimensions.

(For reference only)