Details

---

BUY X24C04S8 https://www.utsource.net/itm/p/12620595.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.5	-	5.5	V
Operating Temperature	TA	Storage	-40	-	85	°C
Write Cycle Time	tWC		1	-	5	ms
Read Cycle Time	tRC		0	-	5	μs
Data Retention			10	-	-	years
Write/Read Current	ICC	VCC=5V, f=1MHz	1.0	-	3.0	mA
Standby Current	IS	VCC=5V, f=0Hz	0.1	-	1.0	μA
Output High Voltage	VOH	IOH=0.4mA, VCC=5V	2.4	-	5.0	V
Output Low Voltage	VOL	IOL=1.6mA, VCC=5V	0	-	0.4	V

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.5V to 5.5V.
   • The device operates over a temperature range from -40°C to 85°C.

2. Write Operations:

   • The write cycle time (t_WC) is between 1ms and 5ms.
   • Do not perform read operations during the write cycle.

3. Read Operations:

   • The read cycle time (t_RC) is up to 5μs.
   • Ensure that the read operation is completed before initiating another read or write cycle.

4. Data Retention:

   • The device retains data for at least 10 years under normal operating conditions.

5. Current Consumption:

   • During active read/write operations, the current consumption (I_CC) is between 1.0mA and 3.0mA.
   • In standby mode, the current consumption (I_S) is between 0.1μA and 1.0μA.

6. Output Levels:

   • The output high voltage (V_OH) should be at least 2.4V when the output current (I_OH) is 0.4mA.
   • The output low voltage (V_OL) should be no more than 0.4V when the output current (I_OL) is 1.6mA.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge.
   • Ensure proper grounding and use ESD protection when handling the device.

8. Programming:

   • Follow the specific programming sequences provided in the datasheet for reliable operation.
   • Use appropriate software tools and hardware interfaces to program the device.

9. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Avoid exposure to extreme temperatures and humidity.

10. Testing:

    • Perform initial testing under controlled conditions to ensure the device functions correctly.
    • Verify all parameters and functionalities as specified in the datasheet.

(For reference only)