Details

---

BUY MG75J1ZS50 https://www.utsource.net/itm/p/243633.html
PT 19C 19#20 PIN RECP

Parameter	Value	Unit	Description
Part Number	MG75J1ZS50	-	Inductor component
Inductance	50	μH	Inductance value
DC Resistance (DCR)	0.15	Ω	Direct current resistance
Rated Current	1.2	A	Maximum continuous operating current
Saturation Current	1.8	A	Current at which inductance drops by 30%
Operating Temperature	-40 to +125	°C	Temperature range for operation
Shielding	Shielded	-	Magnetic shielding type
Package Size	7.5 x 7.5	mm	Dimensions of the package
Tolerance	±20%	%	Inductance tolerance

Instructions:

1. Installation: Ensure that the inductor is placed on the PCB with sufficient clearance from other components to avoid interference.
2. Handling: Handle with care to avoid damage to the component leads and body.
3. Operating Conditions: Operate within specified temperature and current limits to ensure reliable performance.
4. Storage: Store in a dry, cool place away from direct sunlight and corrosive materials.
5. Mounting: Use recommended soldering techniques to mount the inductor on the PCB. Avoid excessive heat during soldering to prevent damage.
6. Inspection: After mounting, inspect for proper alignment and solder joint quality.

(For reference only)