Details

---

BUY NE5230 https://www.utsource.net/itm/p/260686.html
Low voltage operational amplifier

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (Vcc)	Operating supply voltage	4.5	5	5.5	V
Input Voltage Range	Range of input voltages	0		5	V
Output Current	Maximum output current		100		mA
Power Dissipation	Total power dissipation		625		mW
Operating Temperature	Temperature range for operation	-40		85	掳C
Storage Temperature	Temperature range for storage	-65		150	掳C
Quiescent Current	Current consumed by the device in standby mode		10		渭A

Instructions for NE5230:

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) to pin 8 and ground (GND) to pin 4.
   • Ensure that the supply voltage is within the specified range (4.5V to 5.5V).

2. Input Configuration:

   • Apply the input signal to the appropriate input pins, ensuring that the voltage levels are within the acceptable range (0V to 5V).

3. Output Handling:

   • The maximum output current should not exceed 100mA to prevent damage to the device.
   • Use appropriate load resistors or current-limiting components as necessary.

4. Thermal Management:

   • The device can dissipate up to 625mW of power. Ensure adequate heat sinking if operating near this limit.
   • Operate within the specified temperature ranges to ensure reliable performance.

5. Temperature Considerations:

   • For optimal performance, operate the device within the temperature range of -40掳C to +85掳C.
   • Store the device between -65掳C and +150掳C.

6. Quiescent Current:

   • The device consumes approximately 10渭A in standby mode. This should be considered in low-power applications.

7. General Handling:

   • Handle with care to avoid electrostatic discharge (ESD), which can damage sensitive electronic components.
   • Follow standard PCB layout practices to minimize noise and interference.

(For reference only)