Details

---

BUY LTC1386CS https://www.utsource.net/itm/p/308698.html
3.3V Low Power EIA/TIA562 Transceiver

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating Range	2.7	-	5.5	V
Input Voltage	VIN	Absolute Maximum	-0.3	-	VCC+0.3	V
Output Voltage	VOUT	Operating Range	0	-	VCC-1.2	V
Quiescent Current	IQ	VCC = 5V	-	20	-	渭A
Shutdown Current	ISD	VCC = 5V, SHDN Low	-	1	-	渭A
Load Current	IL	Continuous	-	100	-	mA
Reference Voltage	VREF	-	1.24	-	1.26	V
Bandwidth	BW	Small Signal	-	10	-	kHz
Slew Rate	SR	-	-	0.5	-	V/渭s

Instructions for Use

1. Supply Voltage Connection:

   • Connect the supply voltage (VCC) within the operating range of 2.7V to 5.5V.

2. Input and Output Connections:

   • Ensure that the input voltage (VIN) does not exceed VCC + 0.3V or go below -0.3V.
   • The output voltage (VOUT) should be set between 0V and VCC - 1.2V.

3. Power Management:

   • To minimize power consumption, use the shutdown pin (SHDN). When SHDN is low, the device enters a low-power state with a typical current draw of 1渭A.

4. Load Handling:

   • The device can handle up to 100mA of continuous load current. Ensure your application does not exceed this limit.

5. Reference Voltage:

   • The internal reference voltage is typically between 1.24V and 1.26V. This can be used as a stable reference point in your circuit design.

6. Signal Processing:

   • For small signal applications, the bandwidth is approximately 10kHz.
   • The slew rate of 0.5V/渭s should be considered when designing circuits requiring fast transient response.

7. General Guidelines:

   • Always ensure proper decoupling capacitors are placed close to the power pins to maintain stability.
   • Refer to the datasheet for detailed information on PCB layout recommendations and thermal considerations.

(For reference only)