Details

---

BUY APT4016BVR https://www.utsource.net/itm/p/384630.html
ECONOLINE: REC3-S_DRWZ/H4,H6 - Safety standards and approval: EN 60950 certified, rated for 250VAV LVD test report- Applied for Ul 1950 Component Recognised Certification- 3W DIP Package- 4kVDC & 6kVDC Isolation- Regulated Output- Continuous Short Circiut Protection Auto-Restarting

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	1.8		5.5	V
Input Voltage Range	VIN		-0.3		VDD+0.3	V
Output Voltage Range	VOUT		0		VDD-0.3	V
Continuous Current	ICONT			1.6	2.0	A
Peak Current Limit	ILIM			2.5	3.0	A
Quiescent Current	IQ	No load		70		μA
Shutdown Current	ISD	VEN = 0V		0.1		μA
Output Voltage Accuracy	ΔVOUT	VREF=1.22V, RL=1kΩ	-2%		+2%	%
Power Dissipation	PD	TA=25°C			1000	mW
Junction Temperature	TJ	Operating	-40		125	°C

Instructions for Use:

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the range of 1.8V to 5.5V to avoid damage or improper operation.

2. Input Voltage (VIN):

   • The input voltage should not exceed VDD + 0.3V and should not be less than -0.3V relative to ground.

3. Output Voltage (VOUT):

   • Set the output voltage by adjusting external resistors according to the datasheet formula. Ensure it stays within the range from 0V to VDD - 0.3V.

4. Continuous Current (ICONT):

   • The device can handle a continuous current between 1.6A and 2.0A under typical conditions.

5. Peak Current Limit (ILIM):

   • The peak current limit is typically between 2.5A and 3.0A to protect against short circuits.

6. Quiescent Current (IQ):

   • When there is no load, the quiescent current is approximately 70μA.

7. Shutdown Current (ISD):

   • In shutdown mode (VEN pin at 0V), the current consumption drops to about 0.1μA.

8. Output Voltage Accuracy (ΔVOUT):

   • For accurate output voltage, ensure that the reference voltage (VREF) is set correctly, with an accuracy tolerance of ±2%.

9. Power Dissipation (PD):

   • Do not exceed 1000mW power dissipation to prevent overheating.

10. Junction Temperature (TJ):

    • Operate the device within the temperature range of -40°C to 125°C to maintain reliability.

For detailed design considerations and specific application notes, refer to the full datasheet provided by the manufacturer.

(For reference only)