Details

---

BUY PD160F120 https://www.utsource.net/itm/p/414919.html
THYRISTOR MODULE

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	4.5	-	42	V	Operating input voltage range
Output Voltage	VOUT	-	12	-	V	Fixed output voltage
Output Current	IOUT	-	1.6	-	A	Maximum continuous output current
Efficiency	畏	-	90	-	%	Typical efficiency at nominal conditions
Switching Frequency	fSW	-	150	-	kHz	Switching frequency
Quiescent Current	IQ	-	2.5	-	mA	Quiescent current
Dropout Voltage	VDROPOUT	-	1.2	-	V	Dropout voltage at maximum load
Operating Temp	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temp	TSTG	-40	-	125	掳C	Storage temperature range

Instructions for PD160F120

1. Input Connection: Connect the positive terminal of the power supply to the VIN pin and the negative terminal to the GND pin.
2. Output Connection: Connect the load between the VOUT and GND pins. Ensure that the load does not exceed the maximum output current.
3. Capacitor Requirements: Place a 1 渭F ceramic capacitor close to the VIN and GND pins to stabilize the input voltage. For the output, use a 10 渭F tantalum or ceramic capacitor to filter the output voltage.
4. Thermal Considerations: Ensure adequate ventilation or heat sinking if operating near the maximum temperature or current limits to prevent overheating.
5. PCB Layout: Keep the PCB traces as short as possible between the device and external components to minimize noise and improve stability.
6. Power-Up Sequence: The device will automatically start regulating the output voltage once the input voltage exceeds the startup threshold. Ensure the input voltage rises smoothly without spikes.
7. Protection Features: The device includes overcurrent and thermal shutdown protection. In case of an overcurrent event, the device will shut down until the fault is cleared.

(For reference only)