Details

---

BUY DD160KB160 https://www.utsource.net/itm/p/415009.html
DIODE MODULE

Parameter	Description	Value
Device Type	Display Driver	DD160KB160
Resolution	Horizontal x Vertical	160 x 160
Interface	Communication Protocol	SPI, I2C
Power Supply	Operating Voltage	3.3V - 5V
Operating Temp	Temperature Range	-20°C to +70°C
Storage Temp	Temperature Range	-40°C to +85°C
Active Area	Display Size	1.44 inches
Color Depth	Bits per Pixel	16-bit
Refresh Rate	Frames per Second	Up to 60 FPS
Viewing Angle	Viewing Angle	160°

Instructions for Use:

1. Power Supply Connection:

   • Connect the power supply pins (VCC and GND) to a stable voltage source within the specified range (3.3V - 5V).

2. Interface Selection:

   • Choose either SPI or I2C interface based on your application requirements.
   • For SPI: Configure the MOSI, MISO, SCK, and CS pins.
   • For I2C: Configure the SDA and SCL pins.

3. Initialization:

   • Send initialization commands to the display using the selected interface protocol.
   • Refer to the datasheet for specific initialization sequences.

4. Display Configuration:

   • Set up the display parameters such as orientation, color depth, and backlight control if applicable.

5. Data Transmission:

   • Transmit image data to the display buffer via the chosen interface.
   • Ensure data integrity by following the timing diagrams provided in the datasheet.

6. Operation:

   • Regularly update the display with new frames as needed.
   • Manage power consumption by adjusting refresh rates and turning off the display when not in use.

7. Handling Precautions:

   • Avoid exposing the display to temperatures outside the operating and storage ranges.
   • Handle with care to prevent damage to the sensitive electronics.

(For reference only)