Details

---

BUY QM100DY-24 https://www.utsource.net/itm/p/416048.html
HIGH POWER SWITCHING USE INSULATED TYPE

Parameter	Description	Value
Part Number	Device Identifier	QM100DY-24
Type	Component Type	Relay
Coil Voltage	Voltage required to activate the relay	24V DC
Coil Resistance	Resistance of the coil	1000 Ohms
Contact Form	Configuration of relay contacts	SPDT
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250V AC
Insulation Voltage	Dielectric strength between contacts	1000V AC
Operating Temp.	Temperature range for operation	-40°C to 85°C
Mechanical Life	Expected cycles before failure	10 million
Electrical Life	Expected cycles under load	1 million

Instructions:

1. Installation: Ensure that the relay is installed in a location where it will not be exposed to excessive heat, moisture, or mechanical shock.
2. Connection: Connect the coil terminals to the control circuit providing the specified coil voltage. Connect the common (COM) terminal to the load circuit, and use the normally open (NO) and normally closed (NC) terminals as required by your application.
3. Power Supply: Verify that the power supply matches the coil voltage rating to avoid damage or malfunction.
4. Maintenance: Regularly inspect the relay for signs of wear or damage, especially the contacts and insulation.
5. Handling: Handle with care to prevent physical damage. Avoid dropping or applying excessive force.
6. Disposal: Dispose of the relay according to local regulations concerning electronic waste.

(For reference only)