Details

---

BUY SKM100GB128DN https://www.utsource.net/itm/p/419257.html
SEMITRANS IGBT Modules New Range

Parameter	Symbol	Min	Typ	Max	Unit	Description
Voltage Rating	VDSS			1200	V	Drain-to-Source Voltage
Current Rating	ID		100		A	Continuous Drain Current at TC = 25°C
Power Dissipation	PD			240	W	Maximum Power Dissipation (TC = 25°C)
Junction Temperature	Tj	-50		175	°C	Operating Junction Temperature Range
Storage Temperature	Tstg	-55		150	°C	Storage Temperature Range
Gate Charge	Qg		85		nC	Total Gate Charge
Input Capacitance	Ciss		2600		pF	Input Capacitance
Output Capacitance	Coss		360		pF	Output Capacitance
Reverse Transfer Capacitance	Crss		120		pF	Reverse Transfer Capacitance
On-State Resistance	RDS(on)		1.8		mΩ	On-State Resistance at VGS = 15V, ID = 10A
Turn-on Delay Time	td(on)		64		ns	Turn-on Delay Time
Rise Time	tr		76		ns	Rise Time
Turn-off Delay Time	td(off)		48		ns	Turn-off Delay Time
Fall Time	tf		96		ns	Fall Time

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to manage the power dissipation.
   • Handle with care to avoid damage to the leads or body.

2. Electrical Connections:

   • Connect the drain to the high-voltage rail.
   • Connect the source to the low-side of the load or ground.
   • Apply gate voltage carefully to avoid exceeding the maximum ratings.

3. Thermal Considerations:

   • Monitor junction temperature to ensure it remains within the operational range.
   • Use thermal management techniques such as heatsinks or forced air cooling if necessary.

4. Gate Drive Requirements:

   • Provide sufficient gate drive current to achieve fast switching times and minimize switching losses.
   • Ensure the gate voltage is within the specified limits to prevent damage.

5. Safety Precautions:

   • Always follow safety guidelines when working with high voltages.
   • Ensure proper insulation and isolation to protect against electrical hazards.

6. Testing and Troubleshooting:

   • Test the device under controlled conditions before deploying in a live circuit.
   • Check for correct operation by measuring key parameters like VDS, IDS, and temperature.

For detailed application notes and further information, refer to the manufacturer's datasheet and technical documentation.

(For reference only)