Details

---

BUY ADT7461ARMZ https://www.utsource.net/itm/p/422690.html
Temperature Monitor with Series Resistance Cancellation. 4Ch.

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Normal Operation	2.7	-	5.5	V
Operating Temperature	TOPR	Junction Temperature	-40	-	125	掳C
Output Voltage	VOUT	TA = 25掳C, VDD = 3.3V	-	0.8	2.0	V
Response Time	tR	Step Change in Temperature	-	60	-	ms
Thermal Sensitivity	S	TA = 25掳C	7.8	-	8.2	mV/掳C
Quiescent Current	IQ	TA = 25掳C, VDD = 3.3V	-	90	-	渭A

Instructions for ADT7461ARMZ:

1. Power Supply Connection:

   • Connect the VDD pin to a stable power supply between 2.7V and 5.5V.
   • Ensure the GND pin is connected to the system ground.

2. Temperature Measurement Setup:

   • For accurate temperature readings, place the sensor in the desired location.
   • The output voltage (VOUT) changes with temperature; use the thermal sensitivity (S) to convert this voltage into temperature.

3. Output Voltage Monitoring:

   • Monitor the VOUT pin to read the analog voltage corresponding to the temperature.
   • Use an ADC or a voltmeter to measure VOUT and apply the conversion factor from the parameter table.

4. Response Time Consideration:

   • Account for the response time when designing your application to ensure timely and accurate temperature readings.

5. Operating Temperature Range:

   • Ensure that the operating temperature of the device stays within the specified range (-40掳C to 125掳C).

6. Quiescent Current Management:

   • Be mindful of the quiescent current, especially in battery-operated devices, as it can affect overall power consumption.

For detailed specifications and advanced configurations, refer to the official datasheet provided by Analog Devices.

(For reference only)