Details

---

BUY PI74FCT16245TVA https://www.utsource.net/itm/p/439549.html
2-Input Digital Multiplexer

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	1.6		3.6	V
Output Low Voltage	VOL		0.1	0.4	V	IO = 8 mA, TA = 25掳C
Output High Voltage	VOH	2.4		VCC-0.2	V	IO = -8 mA, TA = 25掳C
Input Leakage Current	IIL	-1		1	渭A	VI = 0 to VCC, TA = 25掳C
Propagation Delay Time	tpd		4.5		ns	VIN = VCC/2, VOUT = 1.5V or VCC-1.5V, TA = 25掳C
Power Dissipation	PD			370	mW	Per package, TA = 25掳C
Operating Temperature	Toper	-40		85	掳C
Storage Temperature	Tstg	-65		150	掳C

Instructions for PI74FCT16245TVA:

1. Power Supply Connection:

   • Connect the supply voltage (VCC) between 1.6V and 3.6V to the VCC pin.
   • Ensure a stable power supply to avoid fluctuations that can affect performance.

2. Signal Input:

   • Apply input signals within the specified voltage range to prevent damage to the device.
   • Ensure signal integrity by minimizing noise and interference on input lines.

3. Output Handling:

   • The output pins can drive loads up to 8 mA for low-level outputs and sink up to 8 mA for high-level outputs.
   • Verify the load resistance connected to the output to ensure it does not exceed the current ratings.

4. Propagation Delay:

   • Account for the propagation delay of 4.5ns in timing-sensitive applications.
   • Use appropriate timing margins to accommodate this delay.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C for reliable performance.
   • Store the device in an environment between -65掳C and 150掳C.

6. Handling Precautions:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage.
   • Follow proper soldering techniques and avoid excessive heat during installation.

7. Mounting and Layout:

   • Ensure proper PCB layout to minimize parasitic effects and improve electrical performance.
   • Place decoupling capacitors close to the VCC and GND pins to stabilize the power supply.

For detailed specifications and application notes, refer to the manufacturer's datasheet.

(For reference only)