Details

---

BUY HD68HC000CP12 https://www.utsource.net/itm/p/451628.html
MPU(MICROPROCESSINGUNIT)

Parameter	Description
Part Number	HD68HC000CP12
Family	68HC000
Type	Microcontroller
Architecture	16/32-bit
Operating Voltage	5V
Clock Speed	Up to 16 MHz
Package Type	PGA (Pin Grid Array)
Pin Count	64
Temperature Range	-40掳C to +85掳C
RAM	Internal 256 bytes
ROM	None
I/O Pins	Multiple I/O lines for peripheral interfacing
Special Features	Supports direct memory access (DMA), interrupt controller, timer functions

Instructions:

1. Power Supply Requirements: Ensure the power supply voltage is set to 5V with adequate decoupling capacitors close to the power pins to maintain stability.
2. Clock Configuration: Connect an external clock source or crystal oscillator as per the desired operating frequency up to 16 MHz. Proper bypassing and grounding are essential for stable operation.
3. Reset Circuitry: Implement a reset circuit that can hold the microcontroller in reset during power-up until Vcc stabilizes. A typical reset input should be held low for at least two clock cycles.
4. Programming Interface: Use a suitable programmer/debugger interface compatible with the 68HC000 architecture for loading code into the microcontroller.
5. Heat Dissipation: Ensure adequate heat dissipation if operating near maximum temperature limits. Consider a heatsink if necessary.
6. Handling Precautions: Handle the PGA package carefully to avoid damage to the pins. Follow ESD (Electrostatic Discharge) precautions to prevent damage to the component.

For detailed specifications and application notes, refer to the official datasheet provided by the manufacturer.

(For reference only)