Details

---

BUY TLE2142IDR https://www.utsource.net/itm/p/481556.html
EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating Range	2.7	-	5.5	V
Input Offset Voltage	Vos	Initial @ TA = 25掳C	-0.3	0.1	0.5	mV
Input Bias Current	IB	@ TA = 25掳C	-	20	-	nA
Input Offset Current	IOS	@ TA = 25掳C	-	2	-	nA
Common-Mode Rejection Ratio	CMRR	@ f = 0 Hz, TA = 25掳C	80	-	95	dB
Power-Supply Rejection Ratio	PSRR	@ f = 100 Hz, TA = 25掳C	80	-	100	dB
Slew Rate	SR	Small Signal	0.6	-	1.0	V/渭s
Unity-Gain Bandwidth	GBP	Typical	-	1.4	-	MHz
Output Short-Circuit Duration	tsc	Maximum	-	-	200	ms

Instructions for TLE2142IDR:

1. Power Supply Connection: Connect the power supply pins (Vcc and GND) to appropriate voltage sources ensuring they are within the specified operating range of 2.7V to 5.5V.
2. Input Handling: Ensure input signals do not exceed the common-mode input voltage range to prevent damage or incorrect operation.
3. Biasing and Decoupling: Use decoupling capacitors close to the power supply pins to minimize noise and transient effects.
4. Output Load: The output can be connected directly to loads but ensure that short-circuit protection is considered, with a maximum short-circuit duration of 200ms.
5. Operating Temperature: Operate the device within the recommended temperature range to avoid thermal stress and ensure reliable performance.
6. Handling Electrostatic Discharge (ESD): Be cautious during handling as the device may be sensitive to ESD; use appropriate grounding and handling procedures.
7. Mounting Orientation: Ensure proper mounting orientation and mechanical stability to avoid physical stress on the component which could affect performance.

(For reference only)